How To Fix Whirlpool Stove F2 Error: 6 Solutions (2024)

Feeling puzzled over a Whirlpool stoveF2 error? This frustrating code prevents you from using theovenfor prepping your culinary masterpieces.

Thiserror codesignals a temperature problem that turns your reliable oven into a cold, frustrating silence.

Before panicking and searching for a new stove, let’s understand the causes triggering the F2 code. Also, we’ll explore possible solutions to restore your stove’s reliability.

Before we diagnose the triggers and proper fixes, let’s take a look at the commonly affected models. Note that this problem occurs in electric ranges and wallovens.

WhirlpoolElectric Ranges

• WEG745H0B
• WEG745HO
• WEG750H0
• WGE750C0
• GUI505
• GDFE5C00S
• GDR5500M
• WGE735C
• WGE550C
• GDR5000M
• WEG725C
• WEG845C0
• WEG847C0
• GUI510
• GDFE5C0BB

WhirlpoolWallOvens

• WOV53EC0
• WOC54EC0
• WOC93EC0

What Does F2 Mean on aWhirlpool Stove?

• Meaning:A blinking F2 code on yourWhirlpool stoveindicates trouble with theoven’s temperaturesensor. This means that the sensor registers readings that don’t fall within theoven’s normal ranges.
• Safety Feature:When your stove’scontrol boardgenerates this code, it unleashes a guardian for theapplianceand your kitchen. It prevents potential overheating and ensures your kitchen remains safe.
• Impact on Use:When the F2error messageappears, yourovenbecomes unresponsive. So, your cooking, baking, and heating plans are put on hold.
• Warning Signs:Before you notice the F2error response, you may hear noisy beeps coming from theoven. Also, temperature fluctuations, unresponsive buttons, or irregular heating patterns are also warning signs.
• Importance of Addressing:Ignoring this F2Whirlpool stoveerror can lead to more significant issues down the line. Fixing this issue quickly helps you retrieve your usual kitchen routine.

Why Does YourWhirlpool StoveShow F2 Code?

When yourWhirlpool ovensignals an F2 code, it’s areminderthat something’s wrong in the heat department. With a few culprits to consider, you might feel confused. Let’s clear this confusion and unravel the potential causes:

1. Problematic Temperature Sensor

Theoven temperature sensoracts as youroven’s internal thermometer, constantly monitoring theoven temperature. Then, the sensor reports the temperature readings to thecontrol board. A problematic sensor might send inaccurate readings to thecontrol board, causing the F2 error to appear even when the actual temperature is safe.

This scenario is usually associated with a faulty sensor, a loose connection, or even food debris interfering with its readings.

2. Control BoardConfusion

As the brain of your Whirlpool oven and stove, the control board takes care of all its devices and functions. Among its many duties is receiving the sensor’s readings, analyzing them, and taking proper action. So, the board operates the heating element based on the sensor’s data.

If thecontrol boardmalfunctions, it might misinterpret the temperature sensor readings, leading to the F2 error. This could be caused by electrical surges, faulty components on the board itself, or even a loose connection within the control panel.

3. Heating Element Malfunction

The heating elements are responsible for generating heat inside theoven. Most full-sizeWhirlpool ovenscome with 2 heating elements. Problematic elements lead to uneven heat distribution or excessive temperature rise in theoven. So, they could either underheat or overheat. If one or both elements malfunction, they might not reach the desired temperature.

This scenario ends with triggering the F2 error as a safety measure. This could be due to a faulty heating element, a burned-out connection, or even a power supply issue.

4. Thermal Fuse Failure

The thermal fuse falls into the category ofWhirlpool stovesafety features. This fuse is designed to cut power to the heating elements if theoven temperatureexceeds a safe limit. A faulty thermal fuse could trip prematurely, even when the temperature is within range. This could lead to the F2iconas thecontrol boarddetects an unexpected power interruption.

5. Defective Keypad

While less likely, this problem can contribute to yourWhirlpool stoveF2 error. Imagine a stuckswitchor button on the keypad and its impact on thecontrol board. This problematic component can send continuous signals to thecontrol board. This electronic confusion might lead to thecontrol boardmisinterpreting the data and displaying the F2error code

6. Malfunctioning Door Switches

Thedoor switchis a safety mechanism that ensures theovendoesn’t operate when the door is open. YourWhirlpool ovenrelies on thedoor switchsignal to regulate temperature accurately. If theswitchmalfunctions and thinks the door is open even when it’s actually closed, theovenwon’t activate the heating elements or maintain the desired temperature.

A conflict between thecontrol board’s temperature setting and the realoven temperaturedue to the faultyswitchcan trigger the F2error code.

How To ResetWhirlpool StoveF2 Code

Before turning to complex repairs, resetting yourWhirlpool stoveF2 code is worth a shot. A simple power rest can be the solution if the error is triggered by a simple glitch. Here’s how to do it:

1. Disconnect thepower unitfrom the wall or flip thecircuit breakerto the off position. This cuts power completely.
2. Leave theovenoff for at least five minutes. This allows any temporary electrical issues to clear.
3. Turn the power back on by reversing the first step.
4. Try theoven’s buttons on themenuto check if this process worked.

How To Fix F2Error CodeonWhirlpool Stove

No one likes the frustration of a coldoven. The F2 error on yourWhirlpoolovencan make you desperate but don’t despair. Let’s explore possible troubleshooting for these potential causes and try some DIY fixes before calling aqualified technician.

1. How To Fix Problematic Temperature Sensor

The temperature sensor and the heating elements are nestled close to each other at the back of theoven. To access the sensor, you will need a Phillips head or a flathead screwdriver, depending on the type ofscrews. Before doing any repair steps, unplug the stove from its electricity source. Here’s what to do next:

1. Use the screwdriver to remove the back panel of yourWhirlpool stove.
2. Look for a small metallic probe or rod-like device attached to awiring harness.
3. Start by cleaning any visible food debris around the sensor with a soft cloth. Don’t spill water or soap on this electrical component.
4. Sometimes, the problem is more complicated than the lack of cleanliness. There could be physical damage to the sensor probe or thewiring harness. In this case, you can either test the sensor with amultimeterorskipthe test to replace the sensor.
5. You can perform the test by adjusting the tester to theohmssetting to test the resistance.
6. Connect onemultimeterprobe to each of the sensor’s terminals firmly. The correct resistance range may change with differentWhirlpool stovemodels. But you should get a resistance reading between 1080 to 1090ohmsatroom temperature.

2. How To Fix Control BoardConfusion

Thecontrol boardis a complex component that doesn’t tolerate many DIY solutions. Also, accessing it may require disassembling multipleovencomponents. So, it’s better to seek a professional to handle it to avoid unnecessary damages and costly repairs.

3. How To Fix Heating Element Malfunction

You can access this element like you did with the temperature sensor. Look for long, reddish-orange metallic coils. One should be located at the bottom of theoven, and the other should be at its top.

Visual inspection can reveal cracks, burns, or breaks in the elements’ coils. Also, you can use amultimeterto detect resistance. Follow the same testing instructions applied to the sensor. If you are certain these elements are defective, here’s what you should do:

1. Identify the wires connected to the heating element terminals. Memorize their arrangement or take some photos to facilitate the reassembly.
2. Use suitable pliers to loosen the wire connectors at the element terminals and disconnect the wires.
3. Find thescrewsor clips holding the heating element in place. Use your screwdriver to remove them. This will detach the element from its secured position.
4. For properinstallation optionsof the new element follow a reverse order of these steps.

4. How To Fix Thermal Fuse Failure

The thermal fuse is not far from the heating element. It is a small device with two wires attached. It is usually made of glass or ceramic. You can diagnose a blown fuse through a continuity test. You can do this test using yourmultimeterset to continuity setting.

Attach themultimeter’s probes to each terminal of the fuse. If there’s no beep or reading, the fuse is likely blown. Use pliers to disconnect the wires from the thermal fuse terminals and free the blown fuse. Install a new fuse in reverse order.

Note that testing and replacing is advanced electrical work (live circuits are involved). If you are not skilled or comfortable enough with this type of task, don’t hesitate to call in a professional electrician.

5. How To Fix Defective Keypad

If the keypad has stuck knobs, you should try cleaning it thoroughly. Wipe the keypad (control panel) with a damp cloth to remove any debris that might be causing a stuck button. Test the buttons to identify the problematic one(s). Try operating all the buttons and knobs on the keypad to see if any are stuck or sending continuous signals.

Unfortunately, there are no single replacement buttons sold separately. So, in this case, you will need a new control panel from anonline merchant. It is better to get a repair technician to replace it for you due to the wires connecting it to thecontrol board.

6. How To Fix Malfunctioning Door Switches

Thedoor switchesare typically located on the sides of theovenframe, where the door meets theovencavity. Depending on youroven’s model, you can expect one or three switches. If you test theswitchlike you do with other electrical components and turns out faulty, replacement is the only solution.

However, there are a couple of DIY solutions that might work for a slightly misalignedswitch. First of all, you can try Cleaning theswitchfrom food debris or grime around thedoor switchcan prevent proper activation. You can do this with a damp cloth.

You can also try manual Adjustment. However, this is not an option for allWhirlpool ovens. So, consult your user manual first to ensure this is recognized as a troubleshooting procedure.

Conclusion

Now that you reached the end of thisWhirlpool stoveF2 error, you’ve unraveled the causes and gathered some useful troubleshooting tips. While indicating a problem with the temperature reading, you can find different components to blame.

From a problematic temperature sensor tocontrol boardconfusion, heating element malfunctions, thermal fuse failure, defective keypad, and malfunctioningdoor switches, you’ll need serious inspection and investigation to narrow down the list.

But before seeking professional help, attempting a simple power reset may resolve the issue. If the error persists, addressing these specific components can lead to a successful fix.

Not comfortable with electrical work? Leave it to the pros then! Call certified technicians or contact themanufacturer’s support team for guidance.

Facing moreWhirlpool ovenissues? Check out our other guides onWhirlpool oven3e2orWhirlpool oventouch screen not working!